By 
Auckland is a beautiful city full of greenery and many hills; this means a lot of wear and tear on your carpets, such as rips, dirt, stains and more. This can lead to expensive repairs and lengthening maintenance cleaning bills. So here are 10 tips for Carpet repairs in Auckland for your home or business.
Cut the loose fibres.
This is important as it prevents them from getting entangled with other fibres and causes a mess while you are repairing them. It also prevents the loose fibres from re-sticking to the backing once they are removed.
Trim off the stained area.
Cut out any stained or discoloured carpet areas with a sharp pair of scissors before cleaning. This will help prevent the stain from spreading further into your carpet after you clean it.
Patch a stain with a piece of carpet.
If you have a small stain on your carpet and want to save money, try using a piece of matching carpet to cover the stained area. Use duct tape to secure the patch in place, and then apply a stain-removing product over it. Let the solution sit for 30 minutes before removing it with clean water.
Glue down a fraying edge.
If you notice that your carpet is starting to fray, you can use a carpet bonding seam sealer to glue down the loose edge. It’s important to do this as soon as possible before the frayed area becomes unravelled.
Add an adhesive patch under damaged areas.
This is a good way to avoid having to cut out the entire section of carpeting and then re-glue it back down again. Remember that this method only works if the problem area is less than 2 square feet, though. If it’s larger than that, consider hiring a professional carpet repair company instead.
Super glue small holes and tears in carpeting.
Repairing small holes and tears in the carpet is easy with super glue. Simply brush the area with a little water to remove dirt or debris, then spread a thin layer of super glue over the hole or tear. Let dry overnight, then brush off any excess glue with an old toothbrush. The result: A nearly invisible repair!
Hot steam can remove wrinkles from your carpet.
Just take a large water bowl and heat it up until it boils. Then place the bowl on top of your carpet, ensuring not to spill any water onto the floor below. The steam will loosen up any wrinkles in your carpet, so they disappear!
Vacuum, vacuum, vacuum!
Many people forget to do this, but vacuuming is an essential step in preparing your carpet for repairs. It’s important to remove any debris or dirt from the carpet before you proceed with the repair. If you don’t vacuum first, these particles will get caught in the backing, making it difficult for us to get the job done properly.
Use carpet padding.
Carpet padding can help hide small rips and tears on your carpet, but not large ones, as it may be too thin for larger rips and tears on your carpet. Just cut out a piece that matches your damaged area as best as possible, then place it over top of the damaged area, leaving no exposed edges showing where you placed it down onto your flooring surface area!!
Planning and organizing every step of your carpet repair in Auckland is important to ensure no time is wasted and everything runs smoothly. A little planning and know-how can help make the whole process much easier. Then, when you need someone to come and fix any carpeting, these tips will help you get the best results with ease.
Comments